Published on Write a comment

The “GENERIC” adapter is now called “SD-Link Universal Bluetooth-to-RS232 Adapter for SkyDemon”

We are often asked what the current SkyDemon Bluetooth “GENERIC” adapter thought is.
After receiving a lot of feedback, we realized that the name “GENERIC” was not the best choice. Therefore, we decided to rename the adapter to SD-Link Universal Bluetooth-to-RS232 Adapter for SkyDemon to rename.

The new name better describes what the adapter can do: a universal solution for various applications – flexible, compact and reliable.

What is the SD-Link Universal Bluetooth-to-RS232 Adapter?

The Skydemon Universal Bluetooth to RS232 adapter is comparable to other SkyDemon Bluetooth adapters on the market, however not for a specific radio Instead, it offers a universal solution for a variety of radios and avionics systems.

Basic functions of the SD-Link Universal Bluetooth-to-RS232 adapter:

  • Bidirectional Bluetooth V4.0 BLE module
  • V24 level adjustment
  • Power Supply: 5-28V

What the adapter does not offer:

  • No specific adaptation to the radio connector layout
  • No forwarding of internal radio connections
  • No input or output of additional RS232 data

Comparison of the SD-Link Universal Bluetooth-to-RS232 Adapter

The SD-UNIVERSAL-E is comparable in functionality to the IRXON BT578 (or derivatives) – but with a more compact design and an extended operating voltage range.

SD-GENERIC_E vs IRXON BT578_V2
SD-GENERIC_E vs IRXON BT578_V2

You can use the adapter for all supported SkyDemon radios and autopilots – with manual wiring.

Attention: For the Becker AR620X is the adapter not suitable!

For this purpose we have developed the specially SD-AR620X-E.

The best for last:

The Pin assignment of the SD-UNIVERSAL-E corresponds to that Remote connector of the funke ATR833S, ATR833-II and ATR833A-II.

This means: Plug-and-Play-Solution for these devices!

The remote connector is available in the following Funke wiring harnesses include:

  • BSKS833S-S
  • BSKS833D-S
  • BSKS833OE-S
  • BSKS833GLS-S
  • BSKS833GLD-S

And if you choose the version with Conec Snap-Lock, the module fits exactly into the prepared socket – without the use of screws.

SD-Link Generic Bluetooth BLE Adapter with Conec Snap-Lock, best for ATR833 Skydemon

Here it goes to Overview and variants of cable sets including cable plan for VHF radios from funke

interest aroused?

Click here to go directly to SD-UNIVERSAL-E adapter!

Happy landings!

Published on Ein Kommentar

Plug & Play – for those who don’t want to solder themselves…TQ KRT2 PnP BLE adapter for SkyDemon available!

SkyDemon Bluetooth Adapter for TQ KRT2 radios

Since version 4.0.0 (August 2024), SkyDemon (SD) offers the ability to set COM frequencies of selected radios (standby and active) directly from the app. The list of supported radios is continuously growing.
On the homepage of SkyDemon you can find an interesting VideoUntil now, this involved a bit of tinkering, as you had to power the BLE receiver and adjust the signals to the correct level. You also need a housing… so soldering, tinkering, and screwing.

Our TQ KRT2 PnP adapter is here to change that. Simply plug it in and you're done!

And if you still want to tinker, the adapter offers the possibility of supplying additional devices with V24 data.

SkyDemon Bluetooth Adapter for TQ KRT2
SkyDemon Bluetooth Adapter for TQ KRT2
SD-Link KRT2-E

SD-Link KRT2-E

(7 customer reviews)
119,00 

Bluetooth Low Energy (BLE) adapter for TQ KRT2 VHF radios. Enables connection to SkyDemon navigation software. Easy installation, 12V and 24V power supply. For experimental use only!

Published on Write a comment

Becker™ BLE adapter for SkyDemon functions available!

SkyDemon Bluetooth Adapter for Becker AR620X

Like in Aviation Magazine 08/2024 reported, SkyDemon (SD) will support sending radio frequencies directly to radio devices. Since December 2024, the Becker protocol has also been supported, but so far only in the Android beta version of SD 4.0.2The iOS version with Becker AR620X support will be released in the next SD card release. We are taking advantage of this exciting development at SD Link and are pleased to present our new Becker AR620X Bluetooth Low Energy (BLE) adapter – an experimental prototype that optimally supports this function!

SkyDemon Bluetooth Adapter for Becker AR6201
SkyDemon Bluetooth Adapter for Becker AR6201
SkyDemon Bluetooth Adapter for Becker AR620X

Private: SD-Link Becker AR620x Bluetooth BLE adapter for SkyDemon / Sky-Map

(3 customer reviews)
119,00 

Bluetooth Low Energy (BLE) adapter for Becker™ AR620X VHF radios. Enables connection to SkyDemon navigation software. Easy to use, 12V and 24V power supply, suitable for AR6201 with serial numbers 3000 and higher. AR6203 without restrictions. For experimental use only!